How to mount a phone webcam: which mount is best

обновленный
Cover image for: How to mount a phone webcam: which mount is best

Итак, вы думаете об использовании телефона или планшета в качестве веб-камеры. Вы, вероятно, получили кабель. Мы надеемся, что у вас есть камуфляж . А может быть, вам нужно крепление или подставка. Я купил почти все типы стендов на рынке и даже попытался изготовить некоторые самодельные из вещей, которые были у меня дома. В этом руководстве я расскажу, какие из них могут вам помочь и почему.

Если у вас нет времени подробно рассматривать эти варианты, просто возьмите вот этот:

What makes a good phone webcam mount?

Before starting to look into the various phone mounts, I had a think about what I was really looking for. In order of importance, a good mount should:

  • Have good stability. You need to be able to type, click, and use your computer as you normally would on calls without your phone jiggling around or even falling out of its mount.
  • Make you look good. Step one here is to use Camo, which lets you use the incredible camera built into the phone as your webcam. In terms of your mount, you want it to be positioned near your computer screen. It’s disconcerting to talk to someone who doesn’t seem to be looking at you. You also want to be able to get your mount so that it’s roughly parallel to your face; too low and everyone else on the call will be gazing up your nostrils; too high and it will be pointed at your body.
  • Make it easy for you to mount and remove your phone. Unless you're using a dedicated phone with Camo, you’ll also want to use your phone for other purposes, so being able to set it up and take it down easily is important.
  • Not result in anything too permanent. You might not want to keep a magnetic disk stuck to your smartphone, or a bulky car mount stuck on your iMac.
  • Be compact. When you’re not using your phone as a webcam, you probably don’t want a hulking great piece of plastic cluttering up your desktop.
  • Не похоже на отвратительное бельмо на глазу. Бонусные баллы, если это выглядит красиво.

Хотите выглядеть лучше на ваших видео звонках? Мы собрали статью, полную советов, которые помогут вам выглядеть лучше на вашей веб-камере здесь .

Учитывая эти критерии, давайте рассмотрим различные типы креплений, которые можно использовать для превращения iPhone в веб-камеру.

Штативы

Тестируемый продукт: EVERESTA 42-дюймовый 360 гибкий смартфон, штатив для Великобритании £ 19,54, аналогичный продукт США $ 25,49

Using a tripod behind a 16 inch MacBook Pro.
Использование штатива за 16-дюймовым MacBook Pro.

Штатив был одним из первых стендов, которые я решил проверить. У них есть большая изменчивость; Вы можете отрегулировать высоту и легко перемещать штатив на разные компьютеры, если у вас есть ноутбук и рабочий стол, или в другие места, если вы принимаете звонки в разных местах в течение дня. Например, если вы работаете в кафе, штатив - хороший вариант, потому что его легко и быстро установить: все, что вам нужно, это ровная поверхность. Вы также можете перемещать штатив независимо от компьютера, чтобы убедиться, что он хорошо освещен веб-камерой, даже если компьютер не освещен.

On the subject of light, you can purchase tripods that come with built in ring lights if your desk is not already well lit, but I’ve found that these are generally low-quality tripods attached to low-quality light rings, so you might be better off getting a regular, stable tripod and using a standard lamp, the flash from your phone (which you can control using Camo), or simply the natural light from a window (or the sun, if you’re outside), to improve light levels.

With that said, tripods are generally quite big and bulky. If desk space is tight, you might not be able to sacrifice the space for a tripod. In addition, while you can move your tripod to be in the best light, it’s a little trickier to get it close to your display than when using some other mounts, which can give the impression that you’re looking off to the side on your calls. Most tripods use a grip claw, which, depending on the strength of the grip, can be fiddly when putting your phone in or removing it.

You can use a tripod to the side of your computer if you don’t have space behind it. It’s more obvious that the camera is off to the side on the iMac than the Macbook
Вы можете использовать штатив сбоку от вашего компьютера, если у вас нет места позади него. Более очевидно, что камера на iMac выключена, чем Macbook

Штативы хорошо подойдут людям, которым нужно только одно крепление, но которые часто переключаются на разные компьютеры и ноутбуки или на другие рабочие места. Приблизительно в 25 долларов за хороший штатив, это не самый дешевый вариант, но и не слишком дорогой.

Гибкие руки

Протестированный продукт: держатель для телефона Jumkeet Gooseneck, 18,99 британских долларов

Гибкий рычаг имеет как штатив, так и автомобильное крепление Вы можете прикрепить его к экрану, столу или любому другому объекту, который может быть зажат (например, подставке для монитора или горшку с растением). Он не занимает места на столе, в отличие от штатива, и может обеспечить бесперебойную работу вашего стола, если он прикреплен к ноутбуку или монитору. Гибкие кронштейны также предлагают немного больше гибкости, чем крепление экрана, так как вы можете перемещать кронштейн вверх и вниз из стороны в сторону, чтобы найти идеальное положение. Вы даже можете согнуть руку за угол, если вам нужно.

Here’s this flexible arm being used with a 16-inch Macbook Pro and an iMac. When used with a laptop, you can get a better angle than the built-in webcam, which is always going to be under your face, rather than parallel to it.
Вот эта гибкая рука, используемая с 16-дюймовым Macbook Pro и iMac. При использовании с ноутбуком вы можете получить лучший угол обзора, чем встроенная веб-камера, которая всегда будет находиться под вашим лицом, а не параллельно ему.

Flexible arms generally attach using two claws, so there are no permanent stickers, and I found the grip claws of the flexible arm I tested to be easier to take my phone in and out of than the desktop mounts and car mounts.

The flexible arm was very stable: the picture didn’t judder as I typed, and it was also pretty affordable. For me, this was by far the best mount to use for all laptops, and if you don’t want to use a magnetic sticker, it was the best option for desktops, too. The only requirement for these flexible arms is that you have something to clamp the arm to, so if you have a built-in desk, this type of mount might not work for you. You can see how I clamped the arm to the side of a desk when using it with a laptop, above. Here’s how I attached it to a couple of desktop computers:

I attached the mount to a computer stand on the left, and directly to the back of a monitor on the right.
Я прикрепил крепление к подставке для компьютера слева и непосредственно к задней панели монитора справа.

Присоски

Тестируемый продукт: Автомобильный телефонный аппарат MPOW Dashboard, Великобритания £ 8,99, аналогичный продукт США $ 10,99

Они просто не будут работать, если вы не прикрепите их к ближайшему окну или к экрану вашего компьютера (нет, действительно, не делайте этого). Помните, что некоторые списки на Amazon подразумевают, что они будут придерживаться других поверхностей. Они не будут!

Suction cup mounts might work for your car, but they’re not going to work on your computer
Крепления на присоске могут подойти для вашего автомобиля, но они не будут работать на вашем компьютере

Наклейки крепления

Тестируемый продукт: FLOVEME Магнитное автомобильное крепление US $ 13.99, UK £ 12.16

Using a sticker/magnet mount with the telephoto lens of the iPhone XS Max
Использование стикера / магнита с телеобъективом iPhone XS Max

Any mount that attaches directly to your monitor will let you get your phone webcam close to where the built in webcam is, providing a good angle for your calls. The main variable with these types of mounts is how they attach to your computer and your phone. Of the direct mounts I tried, the best option for desktop users was the sticker/magnet mount pictured above. You stick it to the back of your computer and can add the magnet to the back of a cheap phone case to quickly attach and remove your phone for calls. (Keep reading to see why you don’t want to stick it directly to your phone.)

Они гораздо менее громоздкие, чем штативы, но, вероятно, они не подходят для ноутбуков, если вы планируете перемещать их, так как крепление должно оставаться подключенным к вашему компьютеру, и они будут препятствовать установке вашего ноутбука в чехол. Вы можете попытаться открепить и снова прикрепить свое крепление каждый раз, когда вы используете веб-камеру, но это уменьшит липкость и рискует, что ваш iPhone и крепление упадут и будут повреждены.

Magnetic & MagSafe mounts

Продукты проверены:

Magnets, how do they work? However they do, they make it really easy to attach and remove your iPhone from its webcam mount. Some mounts were so simple they consisted of two magnets; one for the back of your iPhone, the other for the back of your monitor or laptop. You just stick your iPhone to your computer, and grab it off when your call ends. And while the Belkin mount reviewed here does not attach to a laptop with magnets, it uses Apple's MagSafe functionality to make attaching your iPhone quick and easy. A drawback for all of these, however, is that their angle is restricted to the angle of your screen.

Useful only for iPhone and MacBook users, Belkin’s MagSafe mount debuted alongside the release of macOS Ventura’s Continuity Camera feature. While there is of course plenty to say about how Continuity stacks up against Camo, I've also been looking forward to putting this mount through its paces to see how it compares to the other solutions explored in this guide. One thing that already puts it ahead of the other mounts in this category is not having to attach magnets like silver leeches to my laptop.

As expected, the Belkin connected firmly to the circular MagSafe zone in the middle of both the iPhone 13 and iPhone 13 Pro Max that I used for this test. I liked that it could easily be oriented in either landscape or portrait orientations, though changing from one to the other required removing the setup from the laptop screen and either twisting the mount firmly or removing entirely to reorient it. Rotating the phone while it was mounted - as the video on the Belkin site shows - could not be replicated without knocking the whole arrangement from its perch. And though the MagSafe connection is strong, it doesn’t snap to any particular axis. Sometimes when it looked like the mount was attached exactly parallel to the orientation of the phone, I found when mounting it on the screen that it was off kilter, and had to readjust. Not a huge deal, apart from the illusory Belkin visuals.

Placing the mount on top of the screen is fairly straightforward, with a small plastic foot that folds out and hooks onto the top of your laptop. I tested the mount on both a 14-inch MacBook Pro and a 13-inch MacBook Air, and found - unsurprisingly - that it fit more snugly on the thicker frame of the Pro. That said, it did not feel especially precarious on the narrower Air.

On both laptops, it was simple to line up the camera lens with the centre of the screen, a big advantage over the side-mounting solutions for maintaining a good eyeline. Still, since it works only on MacBooks, it would be impossible for all but the shortest users to avoid capturing video from an unattractive low angle (this was slightly better when the phone is mounted in portrait, since the camera lens was higher).

 Having the mounted phone placed below you may be fine for informal video conversations, but for professional purposes I would recommend that you place the laptop on some books or a box to raise the phone lens to eye level.
Having the mounted phone placed below you may be fine for informal video conversations, but for professional purposes I would recommend that you place the laptop on some books or a box to raise the phone lens to eye level.

Raising your laptop as shown above is also about practicality - it keeps the screen of your laptop as close to vertical as possible, something I found to be fairly important when using all of the mounts in this category. As you’d expect from hanging something as substantial as an iPhone to the top or side of your MacBook screen, the centre of gravity shifts quite dramatically as the screen moves away from perpendicular.

In the spirit of science, I attempted to measure the precise angles at which the screens of both laptops began to collapse backward with either of the two iPhones mounted. Using a goniometer, I found that for the combination of MacBook Pro/iPhone 13 Max, the widest angle at which it remained steady for me was about 113°. With the iPhone 13, that expanded just a bit to 119°.

Knowing these angles has two upshots. First, if you tend to work with your laptop literally in your lap, with the screen leaning back fairly far (unflattering angle be damned), the mount and phone combination will yank the screen all the way back, with the laptop possibly headed for the floor. Second, even when working with your laptop situated firmly on a desk in front of you, it is important to remember the physics at play. Twice in one morning I pulled the screen slightly forward to reach something behind the laptop, only to have it slam loudly shut like a bear trap, with my phone (mount firmly attached) rocketed into my lap. No harm done to the laptop, though I don’t like the idea of subjecting it to such violence on a regular basis.

In conclusion, I appreciated the convenient size and quality build of the Belkin mount, and if I conducted mostly informal video calls on my MacBook, I could see myself just keeping it attached to my iPhone for easy transport and quick deployment (the integrated ring/kickstand is also a nice touch, though it doesn’t really factor into how I carry and use my phone on a daily basis). But what keeps this mount from being a solid recommend across the board is the fact that it required extra care to keep my laptop from slamming open or shut, as well as its specificity to iPhones (and only the later MagSafe generations) and MacBooks. Just as Camo works across platforms and devices, our ideal mount would be useful for both desktops and laptops, and both new and older iPhones and Android devices.

The other mounts in this category also score points for ease of use and compactness, but they leave little room for variability - once you’ve stuck the magnets in place, that’s where you need to keep your webcam. And though these magnets held pretty well, there was a very small amount of wobbling when typing on a laptop (realistically, no more that you’d get when using the built-in webcam). Like the Belkin, they're best used with the screen as close to vertical as possible; however, for these you'll also need to keep magnets stuck to your phone (or phone case) and computer. If this idea fills you with horror then you’ll want to look for a different type of attachment.

If you’re going to stick anything on your laptop, a magnet will be less bulky than a car mount, but be aware that they might be difficult to remove.
Если вы собираетесь прикрепить что-нибудь к своему ноутбуку, магнит будет менее громоздким, чем автомобильное крепление, но имейте в виду, что их может быть трудно удалить.

I stuck the magnet to a silicone case for my iPhone, rather than directly to the phone or to a leather case (because stickers will probably damage the leather, and I didn’t want to risk marking my phone), and here’s what happened when I removed the magnet:

Good thing I didn’t stick it directly to my phone! I removed this eventually with a little bit of oil, but it wasn’t fun.
Good thing I didn’t stick it directly to my phone! I removed this eventually with a little bit of oil, but it wasn’t fun.

Мне удалось заставить этот магнитный держатель работать с iMac. Один большой недостаток этого крепления - невозможность прикрепить iPhone назад, поэтому вы можете использовать только селфи-камеру с этим держателем. Вы также не можете отрегулировать угол наклона iPhone при использовании этого крепления, поэтому изображение немного смещено в одну сторону.

I had to use the Selfie camera rather than attach it backwards (the left shows the attachment you want) so the quality of the picture was reduced.
Мне пришлось использовать камеру Selfie, а не прикреплять ее назад (слева показано нужное вложение), поэтому качество изображения было снижено.

The second magnetic mount I tried was much more flexible. The IMstick phone mount was made up of one magnet attached to a wire, and a metal disk to stick to the back of your phone.

Чтобы это работало, вам нужно приклеить как минимум один магнит, либо на вашем телефоне, либо на компьютере, но другой можно удерживать на месте с помощью провода. Вы можете увидеть, как я прикрепил крепление к своему компьютеру с помощью провода, ниже.

It’s a little hard to see in the picture on the left, but I attached the mount to my computer by looping the wires over the front and around the back.
Это немного трудно увидеть на картинке слева, но я прикрепил крепление к своему компьютеру, обмотав провода спереди и сзади.

Это очень хороший вариант, если вам нужна гибкость, или у вас сложная ситуация с монтажом. Он не занимает много места, и, хотя немного сложнее настроить крепление, после того, как вы это сделаете, вы сможете легко брать и снимать свой телефон.

Я чувствовал, что мой телефон был в безопасности, но я заметил, что он качается немного больше, чем крепление, которое использует и наклейки, и магнит, поэтому я предпочел крепление FLOVEME этому, хотя, если вы хотите немного переместить свою веб-камеру Вы можете предпочесть этот.

Щелевые держатели

Тестируемый продукт: держатель мобильного телефона YUYITEK, Великобритания £ 14.99, US $ 14.99

These let you rest your phone in place, rather than holding it securely. As such, they’re easy to get your phone in and out of, but they will wobble when you type. I found it was more difficult to get a good angle when using this slotted holder than with any other mount, as the phone couldn’t be adjusted as easily with these mounts, and would often fall into a different position, anyway.

Using this slotted holder with the phone in landscape and portrait. It takes a bit of maneuvering to get the phone at the right angle, and you risk jogging it out of the holder as soon as you start typing.
Using this slotted holder with the phone in landscape and portrait. It takes a bit of maneuvering to get the phone at the right angle, and you risk jogging it out of the holder as soon as you start typing.

Держатель с прорезями крепится к компьютеру очень прочным зажимом. Я смог прикрепить его к своему iMac, но из-за изогнутой задней части компьютера, оставление его там в течение длительного периода времени может привести к неожиданному отклику. Я даже не хотел пытаться использовать этот клип с моим ноутбуком, так как крепление клипсы настолько плотно, что казалось, что оно может повредить экран.

I didn’t try this slotted holder on my laptop, as I felt the clip could cause damage to the screen. Reviewers of this product seemed to have the opposite problem.
Я не пробовал этот щелевой держатель на своем ноутбуке, так как чувствовал, что клип может повредить экран. У рецензентов этого продукта, похоже, была противоположная проблема.

карданов подвес

Испытанный продукт: 3-осевой ручной стабилизатор карданного подвеса Zhiyun Smooth 4, Великобритания £ 89,00, US $ 99,00

I tried out this gimbal with a 16 inch Macbook Pro and an iMac.
Я опробовал этот кардан с 16-дюймовым Macbook Pro и iMac.

I tried using a gimbal as a webcam, but it was a pretty impractical choice. The height of the gimbal isn’t adjustable, so you’ll either end up with your camera too high, or too low for your screen (as the image above shows, this works a little better with a laptop than a desktop, but neither is ideal). Yes, your gimbal will keep your phone stabilised while it’s being held, but, provided you're not moving your webcam around while you're talking, there really isn’t any benefit to this feature for webcam purposes. Additionally, the gimbal I used periodically turned itself off, causing the phone to drop down, and inserting an iPhone XS Max into the gimbal kept triggering SOS calls. You’d also need to keep your gimbal charged in advance of your calls.

Если у вас уже есть подвес, и вы непреклонны в том, что вам не нужен еще один технологический аксессуар, непременно попробуйте, но вы можете начать с обычного звонка, а не с важной встречи. ,

iPhone док-станции и смарт-клавиатуры

Продукты проверены:

  • Apple lightning dock US $49.00, UK, £49.00
  • Apple Smart Keyboard Folio UK £ 179,00, US $ 179,00

Если у вас есть док-станция для вашего iPhone, вы можете использовать это, или вы можете использовать iPad, если у вас есть чехол, который функционирует как подставка. Ни один из них не даст вам очень хороший угол, но оба работают. Вам также нужно будет использовать селфи-камеру для обоих этих вариантов, если только вы не найдете способ поднять свое устройство до уровня головы.

Both of these options might work a little better on a laptop, but there’s no getting around the unflattering angle.
Обе эти опции могут работать немного лучше на ноутбуке, но не обойтись без нелестного угла.

Makeshift / DIY

Что делать, если вам нужна подставка для веб-камеры сейчас, и у вас нет ничего из перечисленного? Мы немного поэкспериментировали и обнаружили, что, возможно, лучшую самодельную подставку можно сложить вместе со стопкой книг и кофейной чашкой / картонной коробкой:

I made this stand in about 3 minutes by cutting a slot in the top of a coffee cup. You could also use a small cardboard box.
Я сделал это в течение примерно 3 минут, вырезав прорезь в верхней части кофейной чашки. Вы также можете использовать небольшую картонную коробку.

It’s bulky, it doesn’t look great, and your phone might wobble around a bit if you’re doing a lot of typing, but it’s a quick and easy solution to start using your phone as a webcam today.

Есть лучшая импровизированная подставка? Нашли лучшее крепление? Дайте нам знать в комментариях ниже.

Как мы можем помочь?

Наша служба поддержки здесь, чтобы помочь!

Наш офис работает с понедельника по пятницу с 9:00 до 17:00 по Гринвичу. Время в настоящее время 6:33 ДП с GMT.

Мы стремимся отвечать на все сообщения в течение одного рабочего дня.

Наша отличная команда поддержки

Связанный контент

Комментарии (19)

SmallRig also makes a variety of mounts and cages that can work if you are using a spare phone and want something more permanent. Their magic arm combined with any number of other desk, ceiling, tripod mounts can be perfect for any situation.

I found my old Samsung NOTE and S20 Ultra make amazing cameras - even with cracked screens :-)

One note for me, I found that some tables/mounts are prone to shock and can make the camera bounce... just something to be aware of.

Thank you Dean! We put a stabilization mode into Camo (it's under the "framing" options) to deal with issues we saw in wobbly tables and standing desks.

The two best mounts I've found (for me) are from Doolkin on Amazon. https://www.amazon.com/gp/product/B09WTD517N/ref=ox_sc_act_title_1?smid=A303MVJ19XSJH1&th=1

https://www.amazon.com/gp/product/B0BHKH74WC/ref=ox_sc_act_title_2?smid=A303MVJ19XSJH1&psc=1

The first has a great feature in you can remove the arm and buy another magnet and use it on multiple devices. The one issues is that you may not get as much adjustment on the angle so make sure you mount it after testing the angle.

The second one has a mount that allows you to swivel it all the way around which means I can use either the selfie camera or the back cameras! But, it is a sticker mount and isn't removable to move to another device. That may not be a big deal but I've messaged the manufacturer and asked them to combine the two. That with Camo Studio would be AMAZING.

Its not an amazon find, and its often out of stock - but for 24.99 canadian this mount/ring light combo from Ikea is pretty solid - ive been using it for a while, and the ring and arm use 1/4" - 20 threads, so in theory you could use them with a ton of photography clamps etc.

https://www.ikea.com/ca/en/p/lanespelare-ring-light-with-phone-holder-30514357/

Hello,

Just as this article does, I was also looking to find the "best" way to mount a phone on a laptop or monitor. I guess the difference is that I was not willing to buy and try all the mounts available out there :). Nonetheless, thanks for the great, in-depth review.

All that said, I thought I would develop one myself, starting with a few requirements. It has to work in any setting: primarily on laptops and monitors but also on standup tables and workbenches, in the car, on a server rack, on a wall and other furniture. It must be usable with any type of phone, whether in a case or without one. It must have exactly zero tightening knobs or levers. It must be cool - for some reason (I am guessing the reason is cost) all mounts I've seen are monochromatic or in a gray scale at best. Anyone with enough patience and some minimum engineering skills :) should be able to make one at home using common materials. The design must be easy to update and the changes easily implemented.

The result is a 3D-printed phone mounting system. If you're curious to see, I placed some pictures on my web site: https://rail-mounted.com/.

There's a contact page on that site if you want to let me know your thoughts.

Thanks, gabriel

Great article and a lot of helpful suggestions, just none of them worked for me.

I ended up using some velcro locking strips I had around the house.

I was able to cut a strip in half and mount my iPhone SE (1st gen) on top of my monitor. This is a clean look and no wobble. Also, low cost.

Thank you so much for this article. Buying anything is such a hassle for me, and this is exactly the sort of homework I do before getting anything. Appreciate it!

An expensive alternative but one worth considering if you want to add a mic and you are using an M1 based Apple computer is the Sennheiser MKE 200 Mobile Kit

Another vote for Mountie. Been using for over a year with my iPhone 11 then 12 and never had any issue with it pulling my Macbook screen down. I usually mount it to the top so that the camera is directly above the Facetime camera. Fantastic.

This is seriously one of the most thoughtful articles I have seen any brand/company post. This is exactly what I was looking for. Having just paid for lifetime premium, I was looking for a more permanent solution to attach a spare phone to my LG 5k display. I ended up choosing the FLOVEME Sticker mount, as it was perfect for my use case.

In general, I am blown away at the attention to detail and app quality, both on iOS and MacOS, with Camo. I am excited for more amazing development from this team on this product. I hope more and more people support your team. Great work

Hi - have you checked out the Mountie or Mountie+ by Ten One Design?

I've had my eye on them for a while now, and having just signed up for Camo today also treated myself to a Mountie. Will let you know how well it works once it arrives in a few weeks.

Thank you, please do! We're wary of devices like Mountie that clip to the screen. As we noted in the article, these pulled our laptop screen down or pulled the laptop over, and they put the device to one side of the screen, rather than just above the eyeline. That said, if you have one of the smaller phones and one of the larger laptops, it'd probably be fine. Just don't damage that screen!!!

I've been using a selfie-stick velcro-strapped to my monitor stand (LG 5K) It's a little wobbly when adjusting, but it's height-adjustable and I can flip the phone around easily.

I don't usually comment on articles, but this one was so well written and really helped me, thank you so much!

Hey cool -- I was messing around with my own setup for videos/blogging and was thinking there has to be other ways to use my old iPhone as a webcam.

Currently using a desk mount - but intrigued by what you put on the monitor mounts and mechanical arms.

THXXXXXXXXXXXXXXXXXXXXXXXX

Hey, our pleasure. 👍

Really helpful article. Thank you so much!

Thank you! 👍

This article rules -- super great stuff!

Thank you! 🙂

Brilliant article - put me, I hope, on the right track!

An incredibly well-researched and resourceful article. Thank you for saving us hours of time from being drowned in endless “recommendations” and marketing websites

Great article, but an important note about your TL;DR recommended flex arm. The clip that hold your phone is pretty shallow and if you have a case of any substance at all on your phone, you'll struggle to keep it in there. Mine is relatively minimal, but thick enough that if I jiggle my desk a bit, my phone will sometimes come shooting out of it. Taking my case on and off negates a lot of the convenience of the spring-loaded clip in the first place.

Studio Neat's Glif is a bit pricey, but impossible to beat for quality and function and works with any case you could imagine: https://www.studioneat.com/products/glif

I took apart a $5 gooseneck lamp and glued a 1/4" tripod thread to make a Gif-based mount I'm pretty pleased with overall. FWIW.

Thank you! Great tip. 🙂

Another webcam mount: https://www.amazon.com/AboveTEK-Aluminum-Folding-Display-Reception/dp/B074PFVVBH

Thank you!


Можем ли мы улучшить эту статью?

Нам нравится слышать от пользователей: почему бы не написать нам электронное письмо, оставить комментарий или написать в Твиттере @reincubate?

© 2008 - 2023 Reincubate Ltd. Все права защищены. Зарегистрировано в Англии и Уэльсе #5189175, VAT GB151788978. Reincubate® и Camo® являются зарегистрированными товарными знаками. Политика конфиденциальности & условия. Построен с в Лондоне.